EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Photo voltaic Demand Controller is really a hugely effective photo voltaic controller designed for off-grid photo voltaic devices. Depending on multiphase synchronous rectification technological know-how, it makes sure optimized Electricity conversion and procedure security for a wide array of photovoltaic (PV) programs.
Essential Functions from the EPEVER Tracer AN Collection Controller
The Tracer AN sequence utilizes EPEVER Photo voltaic Cost Controller technologies for exceptional solar energy harvesting. Vital characteristics consist of:
Multiphase Synchronous Rectification (MSR) for improved Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Twin-Phase Charging for enhanced battery existence.
Liquid crystal display Display screen with serious-time knowledge monitoring.
Many Load Management Modes such as manual and timer.
Thorough Digital Protections from overcharging, over-discharging, short circuits, and reverse polarity.
Step-by-Move Guide to Setting Up the EPEVER Tracer AN Collection Controller
one. Unboxing and Planning the Controller
Guarantee all parts are provided: Tracer AN device, temperature sensor, conversation cables, and person handbook.
Confirm the design quantity and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Demand Controller
Decide on a very well-ventilated, dry site close to the battery bank.
Protected the Tracer AN controller utilizing the offered mounting brackets.
Sustain correct clearance for heat dissipation.
3. Wiring the Photo voltaic Cost Controller
Caution: Always abide by right basic Read more safety protocols and ensure the system is run off in advance of connecting elements.
Stage one: Join the battery terminals into the demand controller (constructive to optimistic, negative to destructive).
Action 2: Join the photo voltaic panel array for the PV input terminals.
Action 3: Connect the load terminals if employing a immediate load link.
Step four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electric power within the controller by connecting the battery first.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light-weight Regulate.
five. Monitoring and Information Logging
The Tracer AN Series supports serious-time checking using the MT50 distant meter.
Facts could be logged via the RS485 interaction port utilizing computer software for example Solar Station Laptop.
Remote checking is possible Along with the EPEVER WiFi module.
6. Troubleshooting Prevalent Concerns
Difficulty 1: No Power Output
Check out battery voltage and connections.
Validate PV panel voltage exceeds battery voltage.
Difficulty two: More than-Voltage Defense
Validate the solar array’s voltage ranking.
Modify procedure parameters if needed.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT options in the menu.
Advantages of the Tracer AN Sequence with MSR Engineering
The multiphase synchronous rectification technological know-how assures:
Higher Effectiveness: Reduced Vitality losses during conversion.
Improved Trustworthiness: Steady general performance underneath variable hundreds.
For a longer time Battery Existence: Reliable and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification engineering can be an Outstanding option for optimizing solar energy generation and lengthening battery everyday living. By adhering to the above mentioned setup information, buyers can make sure greatest performance and method longevity.